Propylene carbonate (often abbreviated PC) is an organic compound with the formula C4H6O3. It is a cyclic carbonate ester derived from propylene glycol. This colourless and odourless liquid is useful as a polar, aprotic solvent. Propylene carbonate is chiral, but is used exclusively as the racemic mixture in most contexts.

Hi-54K is a tertiary amine which is used to accelerate all kind of solvent less, high solid or solvent based epoxy systems. 2,4,6 Tri(dimethylaminomethyl)phenol (Hi-54K) is a versatile Lewis Base catalyst. The compatibility with polyamine and polyamide hardeners is very good.

MAA is a clear colorless liquid with a sharp odor. It is a functional monomer, an unsaturated monocarboxylic acid. It easily undergoes polymerization and addition reactions.

TMTPA is a colorless to tan liquid. It is an aliphatic trifunctional acrylate of low viscosity widely used as reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks

TPGDA is clear, colorless difunctional acrylic monomer widely used as reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It is a monomer of low viscosity, low odour and moderate skin irritancy with good cure response.

Butyl acrylate (BA) is the ester of acrylic acid and n-butanol and is used as a raw material component in the synthesis of polymers. Butyl Acrylate (BA) is a monofunctional monomer consisting of an acrylate group with a characteristic high reactivity and a cyclic hydrophobic group

Poly(vinyl alcohol) (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer. It has the idealized formula [CH2CH(OH)]n. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless (white) and odorless. It is commonly supplied as beads or as solutions in water

PVB is a resin.Our Mowital grades are named using a self explaining nomenclature. The trade-name Mowital is followed by a capital B stating the aldehyde used. In this case the products are based on butyraldehyde. The numbers refer to the degree of poly-merization, the higher the number the higher the degree of polymerization (vis-cosity). The suffixes T, M, H, S and HH indicate the degree of acetalization, T being the lowest and HH being the highest.

2-Ethylhexyl Acrylate (2-EHA ) is a highly versatile building block that readily copolymerizes with a wide variety of other acrylic and vinyl monomers to tailor specific high molecular weight copolymer properties for a diverse range of non-rigid applications.

PETA is a monomeric acrylic ester capable of polymerising into a hard, clear infusible resin. Primarily used in the formulation of UV and EB curable coatings and inks.

EO3TMPTA is a trifunctional methacrylic monomer. Primarily used in the formulation of UV, LED, EB, and peroxide curable coatings and inks.

DPGDA is a difunctional reactive diluent that is used when improved adhesion and flexibility are required. Primarily used in the formulation of UV and EB curable coatings and inks.

DMDC/MACM is an amine hardener for epoxy resin. Used in solvent-based industrial coatings, anticorrosion paints and solvent-free coatings. DMDC can be used alone or in combination with other hardener (like our range of Polyether Amines).

Ca-stearate is the zinc salt of stearic acid, so called zinc soap. It is a waxy white powder. Stearic acid to produce stearates can be of vegetable or animal origin. Our product has only vegetable source.

It is an ester of glycerin and acetic acid. Triacetin is a colourless liquid, soluble in alcohols and ethers. Not soluble in aliphatic hydrocarbon solvents.

Generally silanes are silicone compound monomers. With at least one SI-C bond we get organosilanes. Further, organofunctional silanes in addition contain 2 reactive (functional) groups. Within these there are the organofunctional trialkoxysilanes. This is the silane group we have in programme. Important feature of trialkoxysilanes is that the 2 reactive groups can react and couple on inorganic materials (glass, ceramic, metal) and to organic resins.

PACm is a diamine. It finds particular use in epoxy flooring. Another use is to produce diisocyanates, which are precursors to polyurethane. The mixture is a colorless solid, but typical samples are yellowish and oily.

Hydrocarbon resins are amorphous thermoplastic polymers produced by polymerization of unsaturated hydrocarbons. These resins have typically low molecular weights ranging from about 400 to 5000 g/mol. The three main types are C5 aliphatic, C9 aromatic, and hydrogenated C5/C9 resins. Main function of HCR is the tackifying effect. Further other physico-chemical properties can be favourably impacted.

Hexylene glycol is a colourless liquid organic solvent with characteristic sweet odour. It is viscous and miscible with most common organic solvents, fatty acids and solvents.

DAA is an industrial solvent used in different resin based products, notably epoxy systems, coatings, adhesives, oils and many other. Appers in form of clear liquid.