Propylene carbonate (often abbreviated PC) is an organic compound with the formula C4H6O3. It is a cyclic carbonate ester derived from propylene glycol. This colourless and odourless liquid is useful as a polar, aprotic solvent. Propylene carbonate is chiral, but is used exclusively as the racemic mixture in most contexts.

PVB is a resin.Our Mowital grades are named using a self explaining nomenclature. The trade-name Mowital is followed by a capital B stating the aldehyde used. In this case the products are based on butyraldehyde. The numbers refer to the degree of poly-merization, the higher the number the higher the degree of polymerization (vis-cosity). The suffixes T, M, H, S and HH indicate the degree of acetalization, T being the lowest and HH being the highest.

Poly(vinyl alcohol) (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer. It has the idealized formula [CH2CH(OH)]n. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless (white) and odorless. It is commonly supplied as beads or as solutions in water

tert-Butyl acrylate is a monomer used to produce poly(tert-butyl acrylate) (PtBA) polymers and copolymers and poly(acrylic acid) polyelectrolyte brushes.

Acrylic acid is an important polymer as raw material for many industrial and consumer products

Butyl acrylate (BA) is the ester of acrylic acid and n-butanol and is used as a raw material component in the synthesis of polymers. Butyl Acrylate (BA) is a monofunctional monomer consisting of an acrylate group with a characteristic high reactivity and a cyclic hydrophobic group

TPGDA is clear, colorless difunctional acrylic monomer widely used as reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It is a monomer of low viscosity, low odour and moderate skin irritancy with good cure response.

IBOMA is a bifunctional reactive diluent that polymerizes when exposed UV light. It is a key monomer for the manufacture of acrylic resins, and is best suited for use in solvent-based systems. It is produced from a renewable raw materials. It is used for the manufacture of high-solid clear coatings for the automotive industry.

IBOA is a monofunctional reactive diluent that polymerizes when exposed to UV light. It is a key monomer for the manufacture of acrylic resins and is the best solution for solvent-based systems.

Hi-54K is a tertiary amine which is used to accelerate all kind of solvent less, high solid or solvent based epoxy systems. 2,4,6 Tri(dimethylaminomethyl)phenol (Hi-54K) is a versatile Lewis Base catalyst. The compatibility with polyamine and polyamide hardeners is very good.

DPGDA is a difunctional reactive diluent that is used when improved adhesion and flexibility are required. Primarily used in the formulation of UV and EB curable coatings and inks.

EVA copolymers are solid thermoplastic copolymers of ethylene and vinyl acetate monomer (VAM). Basically has EVA an elastomeric consistency. Known are generally its good physico-chemical properties, weathering and UV resistance.

Generally silanes are silicone compound monomers. With at least one SI-C bond we get organosilanes. Further, organofunctional silanes in addition contain 2 reactive (functional) groups. Within these there are the organofunctional trialkoxysilanes. This is the silane group we have in programme. Important feature of trialkoxysilanes is that the 2 reactive groups can react and couple on inorganic materials (glass, ceramic, metal) and to organic resins.

It is an ester of glycerin and acetic acid. Triacetin is a colourless liquid, soluble in alcohols and ethers. Not soluble in aliphatic hydrocarbon solvents.

EO3TMPTA is a trifunctional methacrylic monomer. Primarily used in the formulation of UV, LED, EB, and peroxide curable coatings and inks.

PETA is a monomeric acrylic ester capable of polymerising into a hard, clear infusible resin. Primarily used in the formulation of UV and EB curable coatings and inks.

2-Ethylhexyl Acrylate (2-EHA ) is a highly versatile building block that readily copolymerizes with a wide variety of other acrylic and vinyl monomers to tailor specific high molecular weight copolymer properties for a diverse range of non-rigid applications.

2-MTA is a specialty monomer used for the synthesis of specific polymers. These can be used in the coatings, paint, adhesive and plastic segments. 2-MTA helps to improve flexibility at lower temperatures, UV resistance, water resistance and adhesion.

Polycaprolactone (PCL) polymer is a high molecular weight thermoplastic linear polyester polymer derived from Epsilon-caprolactone monomer. Appears in white pellets. PCL polymer is biodegradable and compostable, an important feature in many present and future applications.

Hydrocarbon resins are amorphous thermoplastic polymers produced by polymerization of unsaturated hydrocarbons. These resins have typically low molecular weights ranging from about 400 to 5000 g/mol. The three main types are C5 aliphatic, C9 aromatic, and hydrogenated C5/C9 resins. Main function of HCR is the tackifying effect. Further other physico-chemical properties can be favourably impacted.