PVB is a resin.Our Mowital grades are named using a self explaining nomenclature. The trade-name Mowital is followed by a capital B stating the aldehyde used. In this case the products are based on butyraldehyde. The numbers refer to the degree of poly-merization, the higher the number the higher the degree of polymerization (vis-cosity). The suffixes T, M, H, S and HH indicate the degree of acetalization, T being the lowest and HH being the highest.

Poly(vinyl alcohol) (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer. It has the idealized formula [CH2CH(OH)]n. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless (white) and odorless. It is commonly supplied as beads or as solutions in water

Acrylic acid is an important polymer as raw material for many industrial and consumer products

TPGDA is clear, colorless difunctional acrylic monomer widely used as reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It is a monomer of low viscosity, low odour and moderate skin irritancy with good cure response.

TMTPA is a colorless to tan liquid. It is an aliphatic trifunctional acrylate of low viscosity widely used as reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks

MMA is an ester of methacrylic acid. It is a clear, colourless liquid that has an acrid odour. It is insoluble in water.MMA is also volatile and is flammable in both a liquid and vapour state.

PETA is a monomeric acrylic ester capable of polymerising into a hard, clear infusible resin. Primarily used in the formulation of UV and EB curable coatings and inks.

EO3TMPTA is a trifunctional methacrylic monomer. Primarily used in the formulation of UV, LED, EB, and peroxide curable coatings and inks.

DPGDA is a difunctional reactive diluent that is used when improved adhesion and flexibility are required. Primarily used in the formulation of UV and EB curable coatings and inks.

Generally silanes are silicone compound monomers. With at least one SI-C bond we get organosilanes. Further, organofunctional silanes in addition contain 2 reactive (functional) groups. Within these there are the organofunctional trialkoxysilanes. This is the silane group we have in programme. Important feature of trialkoxysilanes is that the 2 reactive groups can react and couple on inorganic materials (glass, ceramic, metal) and to organic resins.

Hydrocarbon resins are amorphous thermoplastic polymers produced by polymerization of unsaturated hydrocarbons. These resins have typically low molecular weights ranging from about 400 to 5000 g/mol. The three main types are C5 aliphatic, C9 aromatic, and hydrogenated C5/C9 resins. Main function of HCR is the tackifying effect. Further other physico-chemical properties can be favourably impacted.

DAA is an industrial solvent used in different resin based products, notably epoxy systems, coatings, adhesives, oils and many other. Appers in form of clear liquid.

EMA is a clear, colorless and flammable liquid with a strong ester like odor. Slightly soluble in water and miscible with most organic solvents. EMA is used in the manufacture of homopolymers and copolymers. It can be copolymerized with acrylic acid and its salts, esters, acrylamide, methacrylic acid, methacrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, styrene, butadiene and unsaturated polyesters. EMA has excellent polymerization characteristics, low viscosity and high reactivity. EMA is stable, non-corrosive and resistant to most chemicals making it the ideal choice for various industrial applications

Fine white powder, known for ist extremely low bulk density and massive surface area. Produced in flame consist of microscopic particles of amorphous silica.

Colourless liquid organic compound with a distictive odour but relatively low vapour pressure. It serves as solvent but also as accelerator for epoxy systems.

White powder consisting of microscopic beads (200-300 µm) produced by suspension polymerisation of MAA and/or other acrylates. Main characteristics of these polymers is transition temperature, acid value and molecular weight.

MEKO is colorless liquid. It is the oxime derivative of methyl ethyl ketone.

Trimethylolethane (TME) is a unique multifunctional neo-pentane structure polyalcohol with three highly reactive hydroxyls. The neo-pentane structure can provide the excellent stability and improve the property of heat, light, hydrolysis and oxidation resistance. Also, it possesses the distinguished weather ability, glossiness and chemical resistance.

DBE-AGSE is a blend of esters and a colorless transparent liquid with high boiling point and light-fat flavour.

Polycaprolactone polyols are specialty polyester polyols that act as the soft segment component in a PU formulation. Due to enhanced flexibility and better mechanical properties, polycaprolactone polyols are used in applications that require high mechanical performance.