Hi-54K is a tertiary amine which is used to accelerate all kind of solvent less, high solid or solvent based epoxy systems. 2,4,6 Tri(dimethylaminomethyl)phenol (Hi-54K) is a versatile Lewis Base catalyst. The compatibility with polyamine and polyamide hardeners is very good.

DMMA is a clear colorless liquid, insoluble in water.It is a monofunctional methacrylate with a tertiary amino group in the side chain, ideal for improving adhesion of formulations.

Butyl acrylate (BA) is the ester of acrylic acid and n-butanol and is used as a raw material component in the synthesis of polymers. Butyl Acrylate (BA) is a monofunctional monomer consisting of an acrylate group with a characteristic high reactivity and a cyclic hydrophobic group

Acrylic acid is an important polymer as raw material for many industrial and consumer products

tert-Butyl acrylate is a monomer used to produce poly(tert-butyl acrylate) (PtBA) polymers and copolymers and poly(acrylic acid) polyelectrolyte brushes.

Poly(vinyl alcohol) (PVOH, PVA, or PVAl) is a water-soluble synthetic polymer. It has the idealized formula [CH2CH(OH)]n. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless (white) and odorless. It is commonly supplied as beads or as solutions in water

PVB is a resin.Our Mowital grades are named using a self explaining nomenclature. The trade-name Mowital is followed by a capital B stating the aldehyde used. In this case the products are based on butyraldehyde. The numbers refer to the degree of poly-merization, the higher the number the higher the degree of polymerization (vis-cosity). The suffixes T, M, H, S and HH indicate the degree of acetalization, T being the lowest and HH being the highest.

2-Ethylhexyl Acrylate (2-EHA ) is a highly versatile building block that readily copolymerizes with a wide variety of other acrylic and vinyl monomers to tailor specific high molecular weight copolymer properties for a diverse range of non-rigid applications.

2-EHMA – is a clear, colorless liquid with an ester like odor and miscible in organic solvents. EHMA forms homopolymers and copolymers. Copolymers of EHMA can be prepared with (meth)acrylic acid and its salts, amides and esters, and with (meth)acrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, unsaturated polyesters and drying oils, etc. EHMA is also a very useful feedstock for chemical syntheses, because it readily undergoes addition reactions with a wide variety of organic and inorganic compounds. EHMA is a monofunctional monomer with a characteristic high reactivity and a branched hydrophobic moiety.

Stable, non-flammable, white crystalline powder, soluble in water and alcohol. Not soluble in non polar solvents. Stable when dry.

CHMA is a clear, colorless to light yellow liquid with an ester like odor. CHMA is a monofunctional monomer with high reactivity and a cyclic hydrophobic structure. CHMA can form both homopolymers and copolymers with various substances such as acrylic acid and its derivatives, (meth)acrylates, vinyl compounds, and more. Additionally, CHMA is a versatile ingredient in chemical synthesis due to its tendency to participate in additional reactions with many organic and inorganic compounds.

Liquid epoxy resins are a reaction product out of Bisphenol A or Bisphenol F and Epichlorohydrin with a molecular weight < 700 g/mol. Liquid KER epoxy resins will be cured with polyamines or -amides at ambient temperature. coatings with liquid KER epoxy resins show excellent mechanical properties like for instance compressive and tensile strengths and good chemical resistance. Epoxy resins are synthetic resins, containing epoxy groups. Epoxy resins can react with a hardener to thermosetting plastics. End products of epoxy resins show excellent mechanical properties as well as good temperature and chemical resistance.

Polytetramethylene ether glycol (PTMEG) is a waxy, white solid that melts to a clear, colourless, viscous liquid near room temperature. PTMEG is produced by the catalyzed polymerization of tetrahydrofuran (THF). The melting range varies according to the molecular weight.

Polyether polyols are organic compounds that contain more than two hydroxyl groups in their molecular chain. Polyols are one the main raw materials used for the production of polyurethane products, along with isocyanates. Within polyols, polyether polyols are the most widely type in use.