Propylene carbonate (often abbreviated PC) is an organic compound with the formula C4H6O3. It is a cyclic carbonate ester derived from propylene glycol. This colourless and odourless liquid is useful as a polar, aprotic solvent. Propylene carbonate is chiral, but is used exclusively as the racemic mixture in most contexts.

tert-Butyl acrylate is a monomer used to produce poly(tert-butyl acrylate) (PtBA) polymers and copolymers and poly(acrylic acid) polyelectrolyte brushes.

Acrylic acid is an important polymer as raw material for many industrial and consumer products

Hi-54K is a tertiary amine which is used to accelerate all kind of solvent less, high solid or solvent based epoxy systems. 2,4,6 Tri(dimethylaminomethyl)phenol (Hi-54K) is a versatile Lewis Base catalyst. The compatibility with polyamine and polyamide hardeners is very good.

Generally silanes are silicone compound monomers. With at least one SI-C bond we get organosilanes. Further, organofunctional silanes in addition contain 2 reactive (functional) groups. Within these there are the organofunctional trialkoxysilanes. This is the silane group we have in programme. Important feature of trialkoxysilanes is that the 2 reactive groups can react and couple on inorganic materials (glass, ceramic, metal) and to organic resins.

Polycaprolactone (PCL) polymer is a high molecular weight thermoplastic linear polyester polymer derived from Epsilon-caprolactone monomer. Appears in white pellets. PCL polymer is biodegradable and compostable, an important feature in many present and future applications.

DAA is an industrial solvent used in different resin based products, notably epoxy systems, coatings, adhesives, oils and many other. Appers in form of clear liquid.

Antimony trioxide is a flame retardant synergist in combination with halogenated materials, typically with DBDPE used in plastics, rubber, coatings, adhesives, sealants. White pigment Catalyst Appears in white powder form of different granulometry

Fine white powder, known for ist extremely low bulk density and massive surface area. Produced in flame consist of microscopic particles of amorphous silica.

2-EHMA – is a clear, colorless liquid with an ester like odor and miscible in organic solvents. EHMA forms homopolymers and copolymers. Copolymers of EHMA can be prepared with (meth)acrylic acid and its salts, amides and esters, and with (meth)acrylates, acrylonitrile, maleic acid esters, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene, unsaturated polyesters and drying oils, etc. EHMA is also a very useful feedstock for chemical syntheses, because it readily undergoes addition reactions with a wide variety of organic and inorganic compounds. EHMA is a monofunctional monomer with a characteristic high reactivity and a branched hydrophobic moiety.

Clear, odorless and colorless liquid.

1,4-BDDMA is a clear, colorless liquid dimethacrylate monomer with low viscosity and low odor. BDDMA is non-toxic and has a more favorable H&S labelling than alternative products. BDDMA is an excellent reactive diluent due to its low viscosity and is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants.

AMA is a clear, colorless liquid with a pungent odor. It is water-insoluble, with low volatility, it is a low viscosity liquid monomer with dual allylic and methacrylic functionalities, offering chemical and heat resistance, adhesion, hardness, excellent second stage cross-linking and low shrinkage. It is used in oil additives as flow improver, in-floor waxes, textile and metal coatings, paint, varnishes, pressure-sensitive adhesives, low temperature caulks, and sealants.

Silicone surfactants (surface-active materials) are essential and therefore used in the production of all kinds of PU foam. They lower surface tension, emulsify incompatible formulation ingredients, promote nucleation of bubbles during mixing, stabilize the rising foam by reducing stress concentrations in thinning cell-walls and counteract the defoaming effect of any solids added to or formed (e.g. precipitated polyurea structures, during conventional flexible foam reaction).

DMDEE is a tertiary amine catalyst used in the production of polyurethane foam, mainly for one- and two-component rigid foam, spray foam, PU hot-melts adhesives and production of sealants for automotive windshields. It is HFO-compatible.

It is a low toxicity diamine that is mixture of 3,5-dimethylthio-2,4-toluenediamine; 3,5-dimethylthio-2,6-toluenediamine. It is widely used as replacement of the more toxic MOCA.

Diethyl toluene diamine (DETDA) is a an aromatic diamine making and is liquid at room temperature.

Polycaprolactone polyols are specialty polyester polyols that act as the soft segment component in a PU formulation. Due to enhanced flexibility and better mechanical properties, polycaprolactone polyols are used in applications that require high mechanical performance.

TDI is an aromatic isocyanate that reacts with polyols to produce PU foam. It is a clear to light yellow liquid, soluble in organic solvents and commercialized as a mixture of the 2,4 and 2,6 isomers.

Polyester polyols are together with polyether polyols one of the 2 main raw materials used in the production of polyurethanes by reacting with an isocyanate. Polyester polyols can chemically be divided into 2 groups: aromatic and aliphatic polyester polyols. All polyester polyols are liquid and available in numerous different grades.